|
|
Do you have a suggestion for us? A product you'd like us to carry? A website improvement? Just click on the image above and email Christine. We consider suggestions carefully and appreciate your input.
| Related Links
|
Metal Etching
|
Heat Transfer Tool | Etching Tank | Metal to Etch | 'Metal Etching: How-To and Idea Booklet' | Acetate | StazOn Ink and Cleaner | Copper Switch Plates and Outlet Covers
Metal Etching Tank
Easily etch your own base metal (brass,
copper and
nickel) in this etching tank made for ferric chloride (available at most
Fry's Electronics, Radio Shack and well-stocked computer stores). It has a
pump and 2 tubes to aerate the etchant for fast, reliable results, a back
flow check valve and an
on/off switch for easy use. Comes complete and ready to use. Approximate Capacity 4 gallons (uses about
3 gallons of etchant). Dimensions: Features:
Our large etching tank is
automatically sent by UPS ground if it works out to be cheaper for you. We
will audit the charges when we ship. Smaller Size Etching Tank $30.00
|
'Metal Etching: How-To and Idea Booklet' Etching metal (copper, brass, nickel) has never been this easy! Our Metal Etching How-To and Idea Booklet covers how to prepare, etch and finish metals and has lots of creative ideas for further experimenting. Contents:
Metal Etching How-To and
Idea Book In your words: Acetate (8-1/2" X 5-1/2") 10 sheets |
| Transfer Iron | |
| Transfer Iron This tool is great for transferring toner images to metal, for transferring Omni-Gel images to metal or glass and it's also great for doing photocopy transfers on collage. $22.75 |
 It comes with a metal stand but warning the iron and stand get very hot. Do not set on something that will melt. Most transfers take place at about 250 degrees, but iron goes to 450 degrees. Follow the directions and don't burn your art (or yourself)! |
| Copper Switch Plates | |
|
Copper Switch Plate Raw copper switch plates (no lacquer on them). Etch them, patinate them, oxidize them, stamp them with StazOn ink, decoupage them with pictures or you could rivet metal word-tags or shapes to them. Copper screws included. Single Switch Plate $8.00 each
|
Learn more about etching.
I etched this copper switch plate and now it
graces my guest bathroom. The whole project took about 2 hours (actual
prep time: about 10 minutes). |
|
Copper 2-Switch Plate 2-Switch Plate $6.00 each |
|
| Copper 4-Switch Plate These hard to find, raw copper 4-switch plates will look great wherever you put them, and in whatever style you decorate them. 4-Switch Plate $13.00 each
|
 |
| Copper Outlet Cover Raw copper outlet cover (no lacquer to remove). Etch, oxidize, stamp or decoupage them. Copper screws included. Outlet Cover $8.00 each
|
 |
| GFCI Cover Raw copper switch plate is perfect for your GFCI or rocker switches. Screws included. GFCI Cover $8.00 each |
 |
We also sell copper, brass
and nickel stock for your fabrication and etching needs. |
 |
|
StazOn Inkpad and Refill This is the BEST ink for using as a resist for etching metal. It is solvent-based so it acts as a durable resist that stands up to the agitation and long etching times that give the deepest and best looking results. Every pad is accompanied by a refill bottle of ink. Stamp on metal and other porous and non-porous surfaces (shrink plastic, wood, leather, coated paper, glass, ceramic, laminated paper, plastic (not recommended for fabric) Black only. Clean stamps with Ranger Solvent Stamp Cleaner for best results. $14.50 Inkpad and Refill |
|
 |
Ranger/Inkssentials Solvent Stamp Cleaner This is the BEST solvent stamp cleaner I've found! It's great for removing solvent stamping inks (StazOn springs to mind) but it's also great for removing Sharpie marker from metal and so many other tasks that other stamp cleaners just can't do. Christine uses this a lot here at the Volcano Arts Studio. $4.00 Cleaner |
|
Since 10/21/04
